Waterless Trap Seals for Every Drain Size. Shop All Products
Green Drain GD35 waterless trap seal for 3.5-inch kitchen floor drains
Main
GD35

3.5" Waterless Trap Seal

Built for commercial kitchens and food processing. The highest flow rate under 4 inches. 85.37 GPM. Drop-in install, no tools required.

$44.95

Free shipping on all orders

Pipe Size 3.5" (89-100mm)
Flow Rate (U) 85.37 GPM
Install Time 30 Seconds
cUPC Listed
HACCP Certified
Free Shipping

How it works.

Four flexible silicone sealing ribs form a one-way valve. Water, cleaning solutions, and food waste pass through under gravity. When flow stops, the ribs close to create a continuous mechanical seal.

The flexible design accommodates pipe diameters from 89 to 100 mm. The flow capacity jumps significantly from the GD3 (27.92 GPM) to the GD35 (85.37 GPM), handling heavy wash-down operations without restriction.

Green Drain cross-section diagram showing one-way valve open during flow and closed to block sewer gas and pests

Built for high-volume drainage.

Independently tested performance data. The GD35 delivers 3x the flow capacity of the GD3 at Level U.

85.37 GPM Flow Rate (Level U) 3x the flow capacity of the GD3.
323.17 L/min Flow Rate (Level U) Maximum unrestricted flow.
502 Pa Pressure Resistance DTI tested back-pressure rating.
193 L/min DTI Flow Capacity 2.3 L/s tested flow rate.

Technical Specifications

ModelGD35
Pipe Size3.5" (89-100 mm) / DN90
Height51 mm
Housing Diameter (no gasket)78.75 mm (3.100"), bottom 83.6 mm (3.291")
Housing with Gasket97.46 mm (3.837") wide x 50.82 mm (2.001")
Housing MaterialABS Plastic
Valve MaterialSilicone Rubber
Seal MaterialSilicone Gasket
Flow Rate (Level C)32.12 GPM
Flow Rate (Level U)323.17 L/min
Flow Capacity (DTI)193.0 L/min (2.3 L/s)
Pressure Resistance (DTI)502 Pa
PatentsUS 7,900,288 · US 9,027,172

Installs in 30 seconds. No tools.

1
Step 1: Remove the drain grate

Remove the drain grate

Lift the existing drain grate or strainer from the floor drain body.

2
Step 2: Drop in the Green Drain

Drop in the GD35

Place the Green Drain into the drain body or hub opening.

3
Step 3: Press gently to seat

Press gently to seat

The silicone gasket creates a snug seal against the pipe walls.

4
Step 4: Replace the drain grate

Replace the grate

Put the grate back. Done. A full commercial floor in an afternoon.

Add to your order.

Handy accessories for Green Drain owners.

Green Drain Extraction Tool

Extraction Tool

Purpose-built for quick, clean removal of any Green Drain. Simply hook and lift.

$6.95

Green Drain Measuring Tool Keychain

Measuring Tool Keychain

Identify drain sizes in the field. Measure the inside diameter to find the right model.

$6.95

Where the GD35 is used.

The 3.5" floor drain is common in commercial kitchens, food processing facilities, and brewery operations where high flow capacity is essential.

Certifications and compliance.

Green Drain cUPC certification - IAPMO File 9301 ASSE 1072-2020

cUPC Listed

IAPMO File 9301

Green Drain ASSE 1072-2020 barrier-type trap seal certification

ASSE 1072-2020

Trap seal performance standard

Green Drain CE Mark European Technical Assessment ETA-18/0536

CE / ETA-18/0536

European Technical Assessment

Green Drain NSF/ANSI 2 food equipment certification

NSF/ANSI 2

Food Equipment Certified

Green Drain HACCP International food safety endorsement

HACCP International

Certificate RG-04

Green Drain WaterMark Australia certification WM-022837

WaterMark Australia

WM-022837 (DN80)

Green Drain California Proposition 65 compliant

Prop 65 Compliant

California Material Safety

SGS

SGS Pathogen Test

>99.9% blockage of viral aerosols

Green Drain tested by Danish Technological Institute DTI

DTI Tested

Rapport 957187

Green Drain IAPMO R&T certified plumbing product

IAPMO R&T

Certified Testing Lab

Green Drain VA Godkendelse Danish plumbing approval

VA Godkendelse

Danish Plumbing Approval

Ready to protect your drains?

Drop-in install. No tools. Works from day one.